NEC-LCD104DENAD1 is a direct replacement for 10.4” NEC LCD. All compatible models are listed below. Simply swap out your defective LCD screen with NEC-LCD104DENAD1, you now have a sunlight readable LCD Monitor. With our proprietary LED upgrade kit installed, It is so bright that the contents on display visible under strong sunlight. It is easy to install! No technical skills required! Anyone can do it! 90 days warranty.
To fire up LED backlight strip, all you need to do it apply +12V (+12V to + 24V DC) to Red wires and Negative (Ground) to Black wires on
MS610UB. That’s it!
NEC-LCD104DENAD1 is included the following items:
10.4 inch Refurbished LCD screen with upgraded SB series LED kit installed.
MS610UB LED driver
6 pin pigtail connector
Compatible with the following Manufacturers and Models:
Manufacture |
Size |
LCD Screen |
NEC |
10.4" |
NL6448AC33-13, NL6448AC33-18, NL6448AC33-18A |
NEC |
10.4" |
NL6448AC33-24, NL6448AC33-27, NL6448AC33-29 |
NEC |
10.4" |
NL6448BC33-31, NL6448BC33-31D |
General Specifications:
Item |
Unit |
Specifications |
Screen Size |
[inch] |
10.4 |
Native Resolution |
|
640 X 480 |
Active Area |
[mm] |
211.2(H) X
158.4(V) |
Outline dimension |
[mm] |
243.0(W) X
185.1(H) x 10.5(D) |
Bolt Hole Dimension |
[mm] |
132.6 X 166.6 |
Input Voltage VDD |
[Volt] |
3.3V |
Screen Wire Harness |
|
TTL-DF9-31-2829 |
Electrical Interface |
|
TTL (6-bit) |
White Luminance |
[cd/m2] |
1200 |
Contrast Ratio |
|
1000:1 |
BackLight Connector
|
|
BHRS-02VS-1X1 |
Backlight Inverter
|
|
MS610UB |
Response time,
Rising |
msec |
6 |
Response time,
Falling |
msec |
19 |
Viewing Angle - Horizontal |
degree |
80 |
Viewing Angle - Vertical
|
degree |
80 |