CALL US: 888-785-7288, INTERNATIONAL: 415-682-8685, MON-FRI 9AM-4PM PST
0 item(s)

10.4" 2000 nits Direct Replacement for AUO LCD, MS104RSBDF1920D3

Your Price: $379.99
In Stock
  • 2000 nits Sunlight Readable :wide viewing angle and faster response time
  • -30°C to +85°C:Wide Temperature Operating range

Choose Options

LCD Controller Kit
Quantity Pricing
  • 3 - 10
  • $360.99
  • 11 - 49
  • $349.59
  • 50+
  • $341.99
AUO-LCD104D3is a direct replacement for 10.4” AUO LCD. All compatible models are listed below. Simply swap out your defective LCD screen with AUO-LCD104D3, you now have a sunlight readable LCD Monitor. With our proprietary LED upgrade kit installed, It is so bright that the contents on display visible under strong sunlight. It is easy to install! No technical skills required! Anyone can do it! 90 days warranty.
AUO-LCD104D3 included the following items:
10.4" Refurbished (Like new condition)LCD Screen with upgraded SB series LED kit installed.
MS610UB LED Driver
6 pin pigtail connector
Compatible with the following Manufacturers and Models:
Manufacture Size LCD Screen
AUO 10.4" B104SN02-V0, G104SN02-V1, G104SN02-V2
AUO 10.4" G104SN02-V2, G104SN05-V0, G104STN01.0
MS104RSBDF1920D1 General Specifications:
Item Unit Specifications
Screen Size [inch] 10.4
Native Resolution 800 X 600
Active Area [mm] 211.2(H) X 158.4 (V)
Outline dimension [mm] 243.0(W) X 184.0(H) X 8.0(D)
Bolt Hole Dimension [mm] 132.6 X 166.6
Input Voltage VDD [Volt] 3.3V
Screen Wire Harness DF19-20P-1LVDS- 121W
Electrical Interface LVDS (6-bit/8-bit)
White Luminance [cd/m2] 2000
Contrast Ratio 1:2000
BackLight Connector BHSR-02VS-1X1
Backlight LED Driver MS610UB
Response time, Rising msec 10
Response time, Falling msec 20
Viewing Angle - Horizontal degree 80
Viewing Angle - Vertical degree 80
How to connect MS610UB LED driver to your exiting LED wire harness
Most of LED drivers have the following functions:
VIN(Supply Voltage), GND (Power ground), ENA (Enable or ON/Off) and ADJ (brightness adjustment)
MS610UB comes with a 6 pin pig tails wires connector, it is color coded: Red=VIN, Yellow=ENA, White=ADJ and Black=GND
However, in a rate cases, if there is no  ENA (Enable voltage),  the solution would be disable enable by shorting VN to ENA on CN1 connector on MS610UB. When VIN shorted to ENA, all you need to do is applying supply voltage to VIN and GND.