CALL US: 888-785-7288, INTERNATIONAL: 415-682-8685, MON-FRI 9AM-4PM PST
0 item(s)
12.1', 1500 nits, Direct Replacement for NEC LCD, MS121RSBDF941D2+DISENA
12.1', 1500 nits, Direct Replacement for NEC LCD, MS121RSBDF941D2+DISENA

12.1", 1500 nits, Direct Replacement for NEC LCD, MS121RSBDF941D2+DISENA

review
0
0
5
Your Price: $399.99
In Stock
PII:MS121RSBDF941D2(C16)
  • 1500 nits Sunlight Readable:wide viewing angle and faster response time

Choose Options

LCD Controller Kit
Quantity Pricing
Quantity
Price
  • 3 - 10
  • $379.99
  • 11 - 49
  • $367.99
  • 50+
  • $359.99
MS121RSBDF941D2+DISENA is a direct replacement for the 12.1" NEC LCD Screen. MS121RSBDF941D2+DISENA has a much better image quality and is much brighter than old NEC LCD screen. Wider viewing angle and faster response time then old NEC LCD screen. It has upgraded our Sunlight Readable LED Kit and MS121RSBDF941D2+DISENA will last 10X longer than CCFL lamps. It is easy to install! Anyone can do it! 90 days warranty!
Installation takes about 15 minutes.
Disconnect CCFL lamp wire harness from inverter board
Disconnect Screen wire harness on old NEC LCD
Remove old NEC LCD Screen and mount MS121RSBDF941D2+DISENA back to the same location
Connect Screen wire harness to MS121RSBDF941D2+DISENA
Remove old CCFL Inverter and Mount MS610UB back to the same location
Connect Ground (GND) to Black wire
MS121RSBDF941D2+DISENA has the same interface connector, dimension and screw hole as the LCD screens that are listed below.
MS121RSBDF941D2+DISENA included the following items:
Refurbished 12.1 inch LCD screen ( it has upgraded to Sunlight Readable LED kit)
MS610UB LED driver
6 pin pigtail connector with Red and Black wires
Compatible with the following Manufacturers and Models:
Manufacture Size LCD Screen
NEC 12.1" NL8060AC31-12, NL8060AC31-12G
NEC 12.1" NL8060BC31-17, NL8060BC31-17D, NL8060BC31-17E
NEC 12.1" NL8060BC31-20, NL8060BC31-36
MS121RSBDF941D1 General Specifications:
Item Unit Specifications
Screen Size [inch] 12.1
Native Resolution 800 X 600
Active Area [mm] 246.0(H) X 184.5(V)
Outline dimension [mm] 280.0(W) X 210.0(H) x 13.0(D)
Bolt Hole Dimension [mm] 181.3 X 181.3
Input Voltage VDD [Volt] 3.3/5.0V
Screen Wire Harness TTL-DF9-41-3940
Electrical Interface TTL (6-bit)
White Luminance [cd/m2] 1500
Contrast Ratio 1500:1
BackLight Connector BHSR-02VS-1X1
Backlight Inverter MS610UB
Response time, Rising msec 6
Response time, Falling msec 19
Viewing Angle - Horizontal degree 80
Viewing Angle - Vertical degree 80