MS610UB LED driver for 10.4 inch or smaller LED screens. 90 days warranty
How to connect MS610UB to the existing inverter wire harness:
The easiest way would be when JP5 is shorted . Just simply apply VIN (Red wire, 12V – 24V DC) and GND (Black) to MS610UB. Note: Most of 10.4” LCD's inverters do not have ENA. For an example: NEC inverter 104PWBR1does not have ENA.
However, in most of case, you do need to connect “ENA” to turn LED backlight On/Off because 12V DC is always present at VIN, even when unit has powered off. Pin out are printed on MS610UB as shown on first photo above.