CALL US: 888-785-7288, INTERNATIONAL: 415-682-8685, MON-FRI 9AM-4PM PST
0 item(s)

tech support

Recently Added Instruction:Please click here for more instructions
This LCD kit is for testing smaller industrial LCD screens (6.5” to 12.1”) that had TTL interface, which means that you cannot use LST04 to test them. This kit included 2 inverters (MS495DI, MS179DI, MS336EXT & MS529EXT) and 3 most common screen wire harness (TTL-DF9-31-2829 & TTL-DF9-31-3031) that allows you to test LCD screen that has 640X480 resolutions, Such as NEC, Sharp, Toshiba and Torisan. Please visit us online for more detail at

By analysis the failure of the previous version, our engineers had come up with a better circuit design which is a lot more dependable.
First, we had eliminate dip switch, although our return rate is less than 0.8% on last 5 years, dip switch does give us some troubles, such as the bad contacts, especially, when MS456UB uses in an extreme condition. Such as high humidity environment. High humidity will cause the dip switch contacts be oxidizing.
Second, increasing value of C2, by increasing the value of C2, MS456UB-V7 will perform much better in a high temperature environment.
Note: The setting of MS456UB-V7 is the same as MS456UB-V6

How to disable "ENA" on MS456UB
How to disable "ENA" on MS610UB
How to Install LB Series LED Backlight Kit
How to Install UB Series LED Backlight Kit
How to Install XB Series LED Backlight Kit
How to use IT01
How to use IT02
How to use LST01
How to use LST04
How to use LST05
How to Identify Inverter's Pin Assingment