This new MS104RUBDF1420D1 is upgraded LCD screen for Sharp LQ104S1LG32. With our proprietary LED kit installed. Simply swap out your defective Sharp LQ104S1LG32, you now have a sunlight readable HMI Monitor. It is easy to install! No technical skills required! Anyone can do it!
Note: MS104RUBDF1420D1 has the same interface connector, dimension and bolt hole as LQ104S1LG32. 90 days warranty
To fire up LED backlight strip, all you need to do it apply +12V (+12V to + 24V DC) to Red wires and Negative (Ground) to Black wires on
MS610UB. That’s it. It is easy to install! No technical skills require! Anyone can do it!
MS104RUBDF1420D1 has the same interface connector, dimension and screw hole as the LCD screens that listed below.
MS104RUBDF1420D1 included the following items:
10.4 inch New LCD screen, upgraded to Sunlight Readable LED kit
MS610UB LED driver
6 pin pigtail connector
Compatible with the following Manufacturers and Models:
| Manufacture |
Size |
LCD Screen |
| Sharp |
10.4" |
LQ104S1LG31, LQ104S1LG32 |
General Specifications:
|
Item |
Unit |
Specifications |
|
Screen Size |
[inch] |
10.4 |
|
Native Resolution |
|
800 X 600 |
|
Active Area |
[mm] |
211.2(H) X 158.4(V) |
|
Outline dimension |
[mm] |
243.0(W) X 181.6(H) X 12.2(D) |
|
Bolt Hole Dimension |
[mm] |
132.6 X 166.6 |
|
Input Voltage VDD |
[Volt] |
3.3V |
|
Screen Wire Harness |
|
DF14-20P-1LVDS |
|
Electrical Interface |
|
LVDS (6-bit/8-bit) |
|
White Luminance |
[cd/m2] |
1000 |
|
Contrast Ratio |
|
1000:1 |
|
BackLight Connector
|
|
BHRS-02VS-1X2 |
|
Backlight Inverter
|
|
MS610UB |
|
Response time,
Rising |
msec |
6 |
|
Response time,
Falling |
msec |
19 |
|
Viewing Angle - Horizontal |
degree |
70 |
|
Viewing Angle - Vertical
|
degree |
80 |
