This new MITSUBISHI-LCD104DENAD4 is upgraded LCD screen for Mitsubishi LCD. With our proprietary LED kit installed. Simply swap out your defective Mitsubishi LCD, you now have a sunlight readable HMI Monitor. It is easy to install! No technical skills required! Anyone can do it!
Note: MITSUBISHI-LCD104DENAD4 has the same interface connector, dimension and bolt hole as your defective LCD. 90 days warranty
To fire up LED backlight strip, all you need to do it apply +12V (+12V to + 24V DC) to Red wires and Negative (Ground) to Black wires on
MS610UB. That’s it. It is easy to install! No technical skills require! Anyone can do it!
MITSUBISHI-LCD104DENAD4 has the same interface connector, dimension and screw hole as the LCD screens that listed below.
MITSUBISHI-LCD104DENAD4 included the following items:
10.4 inch New LCD screen, upgraded to Sunlight Readable LED kit
MS610UB LED driver
6 pin pigtail connector
Compatible with the following Manufacturers and Models:
General Specifications:
|
Item |
Unit |
Specifications |
|
Screen Size |
[inch] |
10.4 |
|
Native Resolution |
|
800 X 600 |
|
Active Area |
[mm] |
211.2(H) X 158.4(V) |
|
Outline dimension |
[mm] |
243.0(W) X 181.6(H) X 12.2(D) |
|
Bolt Hole Dimension |
[mm] |
132.6 X 166.6 |
|
Input Voltage VDD |
[Volt] |
3.3V |
|
Screen Wire Harness |
|
DF14-20P-1LVDS |
|
Electrical Interface |
|
LVDS (6-bit/8-bit) |
|
White Luminance |
[cd/m2] |
1000 |
|
Contrast Ratio |
|
1000:1 |
|
BackLight Connector
|
|
BHRS-02VS-1X2 |
|
Backlight Inverter
|
|
MS610UB |
|
Response time,
Rising |
msec |
6 |
|
Response time,
Falling |
msec |
19 |
|
Viewing Angle - Horizontal |
degree |
70 |
|
Viewing Angle - Vertical
|
degree |
80 |
