CALL US: 888-785-7288, INTERNATIONAL: 415-682-8685, MON-FRI 9AM-4PM PST
0 item(s)

10.4" 1200 nit, Direct replacement for Sharp, Fanuc, MS104RSBDF931D2+DISENA

Your Price: $659.99
In Stock
  • Sunlight Readable:1200 nits
Quantity Pricing
  • 3 - 10
  • $626.99
  • 11+
  • $607.19
MS104RSBDF931D2+DISENA is a direct replacement for the 10.4" Sharp LCD Screens. MS104RSBDF931D2+DISENA has a much better image quality and it is much brighter than old NEC LCD screens. Wider viewing angle and faster response time then old NEC LCD screens. It has upgraded our Sunlight Readable LED Kit and MS104RSBDF931D2+DISENA will last 10X longer than CCFL lamps. It is easy to install! Anyone can do it! 1 year warranty!
Installation takes about 15 minutes.
Disconnect CCFL lamp wire harness from inverter board
Disconnect Screen wire harness on NEC LCD Screen
Remove old NEC LCD Screen and mount MS104RSBDF931D2+DISENA back to the same location
Connect Screen wire harness to MS104RSBDF931D2+DISENA
Remove old CCFL Inverter and Mount MS610UB back to the same location
Connect Ground (GND) to Black wire
MS104RSBDF931D2+DISENA has the same interface connector, dimension and screw hole as the LCD screens that are listed below.
MS104RSBDF931D2+DISENA included the following items:
New 10.4 inch LCD screen ( it has upgraded to Sunlight Readable LED kit)
MS610UB LED driver
6 pin pigtail connector with Red and Black wire
Compatible with the following Manufacturers and Models:
Manufacture Size LCD Screen
Fanuc 10.4" A02B-0265-C071
Fanuc 10.4" A02B-0281-D082
Fanuc 10.4" A61L-0001-0163
Fanuc 10.4" A61L-0001-0168
NEC 10.4" NL6448BC33-49
Sharp 10.4" LM64C350
Sharp 10.4" LQ10D36A
Sharp 10.4" LQ10D32
Sharp 10.4" LQ10D321
Sharp 10.4" LQ10D367
Sharp 10.4" LQ10D368
Sharp 10.4" LQ104V1DG5A
Sharp 10.4" LQ104V1DG51
Sharp 10.4" LQ104V1DG52
Sharp 10.4" LQ104V1DG61
Sharp 10.4" LQ104V1DG62
Sharp 10.4" LQ104V1DG81
General Specifications:
Item Unit Specifications
Screen Size [inch] 10.4
Native Resolution 640 X 480
Active Area [mm] 211.2(H) X 158.4(V)
Outline dimension [mm] 246.5(W) X 179.4(H) x 10.5(D)
Bolt Hole Dimension [mm] 132.6 X 166.6
Input Voltage VDD [Volt] 3.3V
Screen Wire Harness TTL-DF9-31-2829
Electrical Interface TTL (6-bit)
White Luminance [cd/m2] 1200
Contrast Ratio 1000:1
BackLight Connector BHRS-02VS-1X1
Backlight Inverter MS610UB
Response time, Rising msec 15
Response time, Falling msec 35
Viewing Angle - Horizontal degree 80
Viewing Angle - Vertical degree 80