MS121RSBDF941D2+MS623EXT is a direct replacement for the 12.1" NEC LCD screens. MS121RSBDF941D2+MS623EXT has a much better image quality and it is much brighter than old NEC LCD screens. Wider viewing angle and faster response time then old NEC LCD screen. It has upgraded our Sunlight Readable LED Kit and MS121RSBDF941D2+MS623EXT will last 10X longer than CCFL lamps. It is easy to install! Anyone can do it! 90 days warranty!
Installation takes about 15 minutes.
Disconnect CCFL lamp wire harness from inverter board
Disconnect Screen wire harness on NEC LCD screen
Remove old NEC LCD Screen and mount MS121RSBDF941D2+MS623EXT back to the same location
Connect Screen wire harness to MS121RSBDF941D2+MS623EXT
Remove old CCFL Inverter and Mount MS610UB back to the same location
MS121RSBDF941D2+MS623EXT has the same interface connector, dimension and screw hole as the LCD screens that are listed below.
MS121RSBDF941D2+MS623EXT included the following items:
Refurbished 10.4 inch LCD screen ( it has upgraded to Sunlight Readable LED kit)
MS610UB LED driver
Compatible with the following Manufacturers and Models:
| Manufacture |
Size |
LCD Screen |
| NEC |
12.1" |
NL8060AC31-27, NL8060AC31-27D |
| NEC |
12.1" |
NL8060BC31-32, NL8060BC31-42, NL8060BC31-42D |
MS121RSBDF941D1 General Specifications:
|
Item |
Unit |
Specifications |
|
Screen Size |
[inch] |
12.1 |
|
Native Resolution |
|
800 X 600 |
|
Active Area |
[mm] |
246.0(H) X
184.5(V) |
|
Outline dimension |
[mm] |
280.0(W) X 210.0(H) x 13.0(D) |
|
Bolt Hole Dimension |
[mm] |
181.3 X 181.3 |
|
Input Voltage VDD |
[Volt] |
3.3/5.0V |
|
Screen Wire Harness |
|
TTL-DF9-41-3940 |
|
Electrical Interface |
|
TTL (6-bit) |
|
White Luminance |
[cd/m2] |
1500 |
|
Contrast Ratio |
|
1500:1 |
|
BackLight Connector
|
|
BHSR-02VS-1X1 |
|
Backlight Inverter
|
|
MS610UB |
|
Response time,
Rising |
msec |
6 |
|
Response time,
Falling |
msec |
19 |
|
Viewing Angle - Horizontal |
degree |
80 |
|
Viewing Angle - Vertical
|
degree |
80 |
