MS084RUBDF931D1+DISENA is a direct replacement for the 8.4" Sharp LCD Screen. MS084RUBDF931D1+DISENA has a much better image quality and is much brighter than old LQ9D011. Wider viewing angle and faster response time then old Sharp LQ9D011. It has upgraded our Sunlight Readable LED Kit and MS084RUBDF931D1+DISENA will last 10X longer than CCFL lamps. It is easy to install! Anyone can do it! 1 year warranty!
Installation takes about 15 minutes.
Disconnect CCFL lamp wire harness from main board
Disconnect Screen wire harness on LQ9D011
Remove old LQ9D011
Mount MS084RUBDF9D1+DISENA back to the same location*
Connect Screen wire harness to MS084RUBDF9D1+DISENA
Connect Ground (GND) to Black wire
MS084RUBDF931D1+DISENA has the same interface connector, dimension and screw hole as the LCD screens that are listed below.
MS084RUBDF931D1+DISENA included the following items:
New 8.4 inch LCD screen ( it has upgraded to Sunlight Readable LED kit)
MS610UB LED driver
6 pin pigtail connector with Red and Black wires
*Note: You may have to modify the bolt hole on brackets to mount the LCD in the center. If you are using the same bolt hole, you may see a little bit metal frame on left side
Compatible with the following Manufacturers and Models:
| Manufacture |
Size |
LCD Screen |
| Fanuc |
8.4" |
A02B-0222-C053 |
| Fanuc |
8.4" |
A02B-0222-C058 |
| Fanuc |
8.4" |
A02B-0222-C150 |
| Fanuc |
8.4" |
A61L-0001-0139 |
| Sharp |
8.4" |
LQ9D011 |
| Sharp |
8.4" |
LQ9D01C |
| Sharp |
8.4" |
LQ9D011C |
| Sharp |
8.4" |
LQ9D011K |
| Sharp |
8.4" |
LQ9D012 |
| Sharp |
8.4" |
LQ9D013 |
| Sharp |
8.4" |
LQ9D014 |
General Specifications:
|
Item |
Unit |
Specifications |
|
Screen Size |
[inch] |
8.4 |
|
Native Resolution |
|
640 X 480 |
|
Active Area |
[mm] |
170.9(H) X
128.2(V) |
|
Outline dimension |
[mm] |
243.5(W) X
180(H) x 12(D) |
|
Bolt Hole Dimension |
[mm] |
132.6 X 166.6 |
|
Input Voltage VDD |
[Volt] |
5V |
|
Screen Wire Harness |
|
TTL-DF9-31-2829 |
|
Electrical Interface |
|
TTL (6-bit) |
|
White Luminance |
[cd/m2] |
800 |
|
Contrast Ratio |
|
1000:1 |
|
BackLight Connector
|
|
BHRS-02VS-1X1 |
|
Backlight Inverter
|
|
MS610UB |
|
Response time,
Rising |
msec |
15 |
|
Response time,
Falling |
msec |
35 |
|
Viewing Angle - Horizontal |
degree |
80 |
|
Viewing Angle - Vertical
|
degree |
80 |
