SHARP-LCD084DENAD1 is discontinued. It is replaced by
LQ9D011-LCD
This new SHARP-LCD084DENAD1 is a direct replacement for 8.4" Sharp LCD Screen. It had upgrade our LED Kit and MS084RUBDF931D1 will last 10X longer than CCFL lamps. It is easy to install! Anyone can do it! 1 year warranty!
SHARP-LCD084DENAD1 has a much wider viewing angle and faster response time then your old 8.4" Sharp LQ9D011 LCD screen. SHARP-LCD084DENAD1 has the same interface connector, dimension and screw hole as the LCD screens that listed below.
To fire up LED backlight strip, all you need to do it apply +12V (+12V to + 24V DC) to Red wires and Negative (Ground) to Black wires on
MS610UB. That’s it. It is easy to install! No technical skills required! Anyone can do it!
Note: You may have to modify bracket to get center. If you are using the same bolt hole, you may see a little bit metal frame on left side
SHARP-LCD084DENAD1 has the same interface connector, dimension and screw hole as the LCD screens that listed below.
SHARP-LCD084DENAD1 included the following items:
8.4 inch LCD screen, upgraded to UB series LED kit, Resolution: 640X480
MS610UB LED driver
6 pin pigtail connector with Red and Black wires
Compatible with the following Manufacturers and Models:
Manufacture |
Size |
LCD Screen |
Sharp |
8.4" |
LQ9D011 |
Sharp |
8.4" |
LQ9D01C |
Sharp |
8.4" |
LQ9D011C |
Sharp |
8.4" |
LQ9D011K |
Sharp |
8.4" |
LQ9D012 |
Sharp |
8.4" |
LQ9D013 |
Sharp |
8.4" |
LQ9D014 |
General Specifications:
Item |
Unit |
Specifications |
Screen Size |
[inch] |
8.4 |
Native Resolution |
|
640 X 480 |
Active Area |
[mm] |
170.9(H) X
128.2(V) |
Outline dimension |
[mm] |
243.5(W) X
180(H) x 12(D) |
Bolt Hole Dimension |
[mm] |
132.6 X 166.6 |
Input Voltage VDD |
[Volt] |
5V |
Screen Wire Harness |
|
TTL-DF9-31-2829 |
Electrical Interface |
|
TTL (6-bit) |
White Luminance |
[cd/m2] |
800 |
Contrast Ratio |
|
1000:1 |
BackLight Connector
|
|
BHRS-02VS-1X1 |
Backlight Inverter
|
|
MS610UB |
Response time,
Rising |
msec |
15 |
Response time,
Falling |
msec |
35 |
Viewing Angle - Horizontal |
degree |
80 |
Viewing Angle - Vertical
|
degree |
80 |