LST05-V4, LCD screen tester (for testing eDP/embedded Display Port interface). With its built-in Color bar generator, it can test resolution from 1280X800 to 3840X2160. Two screen wires harness are included, so you can test all eDP interface LCD screens. With additional wire adapters (Listed below), it allows you to test iPAD, iPAD Mini, Macbook Air, Macbook Pro, Surface book, Surface Pro 3, Surface Pro 4 and Surface Pro 5. Plug and play! LST05 Dimension: 155mmX115mmX25mm
Key features:
Single Chip Computer:
Using a single chip computer to control resolutions from 1280X800 to 3840X2160.
How to test eDP LCD screen
Connect +12V Dc AC-DC Adapter
Connect Screen wire harness to LCD screen(LST05-30P or LST05-40P)
Press S1 and S2 to select resolution (Refer to resolution chart that located at the bottom of LST05-V4)
Press Red Button to turn ON LST05-V4
Press PgUp or PaDn to select test pattern
Changing B+:
Press Red button once to Turn Off LST05, Press down S5 button for 5 seconds, then change to 5V or 12V
Changing LED Driver output current A2
A2 is for LCD screen that use external LED driver. . It is for adjusting output current. By default, it is 120ma. Press S5 to adjust output current if you are suing an external LED driver
